CHIMNEYRX 300467 Paint N Peel Fireplace Cleaner - Removes Smoke & Soot Stains from Brick, Tile, & Stone Surfaces Around Fireplace Fronts & Hearths

Brand: CHIMNEYRX

CHIMNEYRX Paint “N” Peel Brick and Stone Fireplace Cleaner restores your fireplace’s beauty with ease. This water-based cleaner removes stubborn smoke and soot stains without scrubbing or harsh chemicals. Simply apply a thick coat, let it dry for 24-48 hours, and peel off to reveal a clean surface. Coverage is 10-20 sq. ft. per half-gallon container. It works on brick, stone, marble, slate, tile, concrete, mortar, and limestone. Always test on textured or man-made surfaces before full application. Important Note: For best results, apply a thick, even coat (1/8" - 3/16" thick) across the entire surface, ensuring full coverage near the edges. Maintaining this thickness will help the product peel off smoothly. When removing, ensure the product is completely dry. Starting at an edge, peel the film off slowly at an angle with both hands, taking care not to tear it. If it doesn't peel off in a continuous sheet, re-coat with a thicker layer, allow it to dry, and re-peel. Application Tips: Use painter's tape to define the application area. Apply Stone Fireplace Cleaner using a penny to measure, ensuring it reaches past Lincoln’s hairline. Let the material dry for at least 48 hours, then peel off to reveal a stain-free surface.

• FIREPLACE FRONT SOOT CLEANER: Effectively removes stubborn smoke and soot stains
• it dries into a thick, rubbery film that peels away, lifting dirt and grime to restore a fresh, clean look, renewing the charm of your fireplace fronts and hearths
• NON-TOXIC SOOT CLEANER FOR FIREPLACE: This water-based, non-toxic fireplace brick cleaner contains no harsh chemicals, making it a safe choice for restoring your fireplace’s original beauty
• NO SCRUBBING REQUIRED: Our fireplace stone cleaner does the hard work, eliminating the need for excessive manual effort, all without the risk of etching or discoloration on your fireplace fronts due to harsh chemicals
• EASY APPLICATION: Apply a thick, liberal coat of our stone fireplace cleaner (1/8" - 3/16" thick), maintain this thickness across entire surface to help the product peel off easily
• let it dry for 24-48 hours, and peel away to reveal a clean surface
• COVERAGE: One half gallon container of our fireplace soot remover covers 10-20 sq. ft. and works on nearly all brick, stone, and tile surfaces

Scent: Unscented
Size: 64 Fl Oz (Pack of 1)